Have a question about our running board light Kit or troubleshooting a problem?

Check out this list of common questions to find the answer you are looking for!


Do I have to have auto-deploy boards for this kit? . . .

No, this kit will work regardless of wehther you have auto-deploy boards, or any boards at all!

Do I have to have running boards for this kit? . . .

No, this kit will work regardless of wehther you have auto-deploy boards, or any boards at all!

What will turn these lights on? . . .

The lights will actiavte with the opening of a door, unlocking of the doors with your remote key or by turning your interior dash light control all the way to permanent on setting.

What will turn these lights off? . . .

Unless they are set to permanent on with your in dash switch, the lights will fade similiar to your puddle lamps. (typically about 15-45 seconds)

Approx how long is each light? . . .

The running board light stip is approx 83" in length on each side.

Will this work for my shorter cab or extended cab truck? . . .

The kit is ready for supercrew and extended cab trucks, if you are using it on a shorter model the lights are designed to be trimmer at the back. This can be done using a common pair of scissors across the gold connection point.

Can I get them in a different color? . . .

Currently we offer the lights incool white, but if you are looking for something custom please contact us.

Will these lights hold up to snow, car washes, etc.? . . .

Yes! Proper isntall is important, but if done correctly the lights will last through inclement weather, extreme temperatures, etc. A clean mounting surface and copiuos RTV silicone during isntall are critical.

I have a 2015, how do i get the wire into the truck? . . .

If you remove the door sill panel, you will see a white plastic tab (push tab configuration) You will simply need to drill a small hole in this plastic tab to run your wire through.

Can I install this kit at the same time with a bed light kit? . . .

Yes,they install very similarly and with the same connection points so you can certianly install them in tandem.


Not what you are looking for?